Introduction     Search/Sitemap
Trans4mind Home Page
Home Article Library Home, Garden & Hobbies

5 Types of Residential Drainage Systems
That You Should Know About

Drainage systems are like the backbone of the residential areas and their significance can’t be denied in the modern era. The core responsibility of the drainage systems is to remove the drainage water, rainwater or wastewater away from the house. Since the modern housing system is quite sophisticated only efficient drainage ensures the long term stability of the structure. The efficiency of this system is greatly desired all the time, but especially when it rains and the quantity of water increases. In order to ensure a hundred percent satisfaction, timely maintenance is required. That’s why only hire those experts that have experience with drain systems. Because the better a drain system is maintained, the better it would perform under pressure. If you don’t know a professional, then it is better you ask a friend or search online before the rain comes down hard this year. Below you can find the types of residential drainage systems that are commonly found in society.

1. Residential Drainage Systems

Among the rest of the drainage systems, residential drain systems are quite important because they are directly associated with the residential area. An efficiently designed system quickly removes the water from walkways, driveways, and rooftops to avoid unnecessary flooding. That’s why always hire the best drain system repairs for smooth water removal. It is important because if the water is not removed in due time it can initiate the rotting process quicker than you imagine. Afterwards that you may have to face seepage and leaking issues and much more. There are four prominent residential drainage systems that you may find around you. Regardless of the type of drainage system, it requires timely maintenance because without it the system is bound to fail. That’s why always make sure you have the best professional team taking care of that. Basic drain care is easy and you and you can do it yourself with a little effort, but for bigger issues, you are bound to hire experts for drain repair.

2. Surface Drainage Systems

One of the most common types of residential drain systems is the surface drainage system. The surface drainage system is specifically designed for the quick removal of water that is encountered at the surface. Because before it goes to the pipes underground it has to be channeled properly for instant removal. Otherwise, the water will keep absorbing in the area nearby and start causing damage. A surface system is usually in the form of small and shallow trenches that are dug in a parallel pattern. They act as a channel for water removal. They are filled with material so the maximum amount of water is transferred to the main drain so that pooling and flooding can be avoided. The pooling and flooding are both undesired situations for the residential areas because excess water always brings damage. The immediate effect of this water can be seen in the form of mold, but frequent pooling or flooding may result in wet patches and leaking.

3. Subsurface Drainage Systems

You may think that can rest once the surface system is installed in your home and it is enough to deal with excess water. Unfortunately, that’s not quite right because the surface drainage system is the smallest part of the bigger picture. That’s right because another system that is widely known as the subsurface drain system collects large amounts of water and takes it away from the residential areas. It is also known as the French drain system. Its installation is not as simple as it was for the surface drain system because it requires considerable digging and it is installed several inches under the ground and then covered with a layer of soil.

4. Slope Drainage Systems

It is another excellent and probably the most efficient drainage system for the residential areas. In this kind of system geological conditions are used to deal with excess water. As it is evident from the name, the inclined surfaces are used to control the flow of water downward and pipes are installed to remove the water from residential areas. It is natural that water flows from a higher position to the lower and this phenomenon is used for quick removal. The only thing that should be controlled for this kind of drainage system is the contents of the water. Since the water comes down hard it must be filtered before it enters the pipes, otherwise, it can cause unnecessary choking.

5. Downspout and Gutter systems

This is a very typical drainage system and it is designed to collect wastewater or excess water underground. Usually, it is done to create the proper flow because a few drops only get absorbed and can’t be removed. That’s why a reservoir is created below the ground that keeps collecting the fractions of water and later moves it out by using a pump. This keeps the water from pooling and unwanted flooding in the residential area. However, since the whole system is built underground it requires extra care as well. That’s why make sure you have the best contractor in the area at your disposal to deal with it.

The drainage systems are vital for the survival of any structure because it is frequently threatened by excess water. Before you can install a good drainage system, you should pay attention to how the water cycle works and how it can damage the building. Most of the time people are unaware of the presence of excess water in the building that keeps eating the structure without your consent.

Did you find this article helpful? Share your thoughts with friends...

Share on Facebook   Share on Twitter
Read more Home, Garden & Building articles
You'll find good info on many topics using our site search:
Trans4mind HomeResourcesArticle Library